Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Beckman DM5XL: (1 year) CAL VER /5520
DATE:                  02-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       18
NUMBER OF LINES:       97
CONFIGURATION:         Fluke 5520A
=============================================================================
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: None
  1.004  DISP         Temperature: 0 - 50degC
  1.004  DISP         Humidity: <70%
  1.005  DISP         [32]                 WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  HEAD         {AC VOLTAGE}
  1.007  DISP         Connect the 5520 to the UUT as follows:
  1.007  DISP         [32] 5520A NORMAL HI to UUT V/OHM
  1.007  DISP         [32] 5520A NORMAL LO to UUT COM
  1.008  HEAD         AC VOLTAGE: {200V Range}
  1.009  5520   200   190.0V         1.2% 1U       60H            SI       2W
  2.001  HEAD         AC VOLTAGE: {500V Range}
  2.002  5520   500   450V           1.2% 10U      60H            SI       2W
  3.001  HEAD         {DC VOLTAGE}
  3.002  HEAD         DC VOLTAGE: {1000V Range}
  3.003  5520   1000  1000V          0.8% 0.1/                             2W
  4.001  HEAD         DC VOLTAGE: {200V Range}
  4.002  5520   200   190.0V         0.8% 0.05/                            2W
  5.001  HEAD         DC VOLTAGE: {20V Range}
  5.002  5520   20    19.00V         0.8% 0.05/                            2W
  6.001  HEAD         DC VOLTAGE: {2V Range}
  6.002  5520   2     1.900V         0.8% 0.05/                            2W
  7.001  HEAD         DC VOLTAGE: {200mV Range}
  7.002  5520   200   190.0mV        0.8% 0.05/                            2W
  8.001  HEAD         {RESISTANCE}
  8.002  DISP         Connect the SENSE leads DIRECTLY to the UUT.  Connect
  8.002  DISP         the NORMAL leads to the SENSE leads AT the UUT.
  8.003  HEAD         RESISTANCE: {2 MOhm Range}
  8.004  5520   2     1.900MZ        1.2% 0.1/                             2W
  9.001  HEAD         RESISTANCE: {200 kOhm Range}
  9.002  5520   200   190.0kZ        1.2% 0.1/                             2W
 10.001  HEAD         RESISTANCE: {20 kOhm Range}
 10.002  DISP         Connect the 5520 to the UUT as follows:
 10.002  DISP         [32] 5520A AUX HI to UUT V/OHM
 10.002  DISP         [32] 5520A AUX LO to UUT COM
 10.002  DISP         [32] 5520A NORMAL HI to UUT V/OHM
 10.002  DISP         [32] 5520A NORMAL LO to UUT COM
 10.003  5520   20    19.00kZ        1.2% 0.1/                             CW
 11.001  HEAD         RESISTANCE: {2 kOhm Range}
 11.002  5520   2     1.900kZ        1.2% 0.1/                             CW
 12.001  HEAD         RESISTANCE: {200 Ohm Range}
 12.002  5520   200   190.0Z         1% 0.3U                               CW
 13.001  HEAD         {DIODE TESTER}
 13.002  DISP         Connect the 5520 to the UUT as follows:
 13.002  DISP         [32] 5520A NORMAL HI to UUT V/OHM
 13.002  DISP         [32] 5520A NORMAL LO to UUT COM
 13.003  DISP         Set the DMM FUNCTION/RANGE switch to DIODE.
 13.004  5520         0.5V                                              S  2W
 13.005  EVAL   Does {the display read approx. 0.500 (diode junction)}?
 14.001  HEAD         {DC CURRENT}
 14.002  DISP         Connect the 5520 to the UUT as follows:
 14.002  DISP         [32] 5520A AUX HI to UUT 200mA
 14.002  DISP         [32] 5520A AUX LO to UUT COM
 14.003  HEAD         DC CURRENT: {200mA Range}
 14.004  5520   200   190.0mA        1.2% 0.1U                             2W
 15.001  HEAD         DC CURRENT: {20mA Range}
 15.002  5520   20    19.00mA        1.2% 0.01U                            2W
 16.001  HEAD         DC CURRENT: {2mA Range}
 16.002  5520   2     1.900mA        1.2% 0.001U                           2W
 17.001  HEAD         DC CURRENT: {200uA Range}
 17.002  5520   200   190.0uA        1.2% 0.1U                             2W
 18.001  END